Product Details:
|
Power Output: | 5W | Distance: | 10km LOS |
---|---|---|---|
Interface: | RS232, RS485, USB | Protocol: | Modbus RTU |
Frequency: | 433MHz | Type: | Radio Based |
Highlight: | 5W Wireless Communication Module,10km LOS Wireless Communication Module,PLC Wireless DTU Module |
5W PLC Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement For Modbus RTU
General Introduction
LS-R524 wireless DTU whose transmission distance reaches 10km LOS,
supports wireless communication between Siemens S7-200, S7-300 series PLC, Schneider PLC, Mitsubishi PLC, ABB PLC etc.
LS-R524 supports Modbus RTU protocol
LS-R524 DTU can also connect with transducer, HMI and sensors for wireless communication. It supports point to point, point to multi-points wireless data transmission. Wireless solution has the advantage of keep users from wiring cables in dangerous field, easy to set up, no need program knowledge. It is a reliable and competitive solution.
Technical specification
Frequency | 433MHz or 450MHz, 470MHz |
Power Output | 5W |
Protocol support | Standard Modbus RTU or PPI |
Power supply | 9-36V DC usually use 24V DC or 12V DC |
Interface | RS-485(default)or RS232 or USB |
Channel No. | 15 channel, use DIP to change |
Antenna | Free sucker antenna with 1.5m cable(buy 5.5dBi sucker antenna) |
Temperature | -35℃~+75℃ (industrial) |
Dimension | 175×115×32(mm) exclude antenna |
Fix method | Screw |
Application examples:
LS-R524 DTU DIP switch setting
Note: about channel setting
Channel No. | DIP Setting | Channel No. | DIP Setting | Channel No. | DIP setting | Channel No. | DIP setting |
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
7 |
|
8 |
|
DIP1 ON means 1
DIP2 ON means 2
DIP3 ON means 4
DIP4 ON means 8
For example, channel 15, you need to set DIP 1, 2, 3 and 4 all ON
Contact Person: Ms. Sunny
Tel: 86-13826574847