9-12V Wireless Irrigation Controller Wire Solution Sub Decode Board 128 Station Decode Board
Feature under “Moisture control" mode:
One key push-hold to setup Dry control level, and one key push-hold to setup wet control levels.
Then the system will keep the soil moisture level within the set up range.
User can adjust wet/dry control levels on the screen.
Set maximum irrigation duration to prevent flooding by broken pipe.
Moisture sensor could be buried shallow or deep into the soil.
The LCD will in sequence show "Dry control %, Current %, Wet control %, Max (Duration)".
Feature under "Timer control" mode:
Uses the moisture sensor as rain sensor to prevent irrigation in the rain.
Set any sensitivity of the rain sensor as desired.
User can set up any length of irrigation duration as desired.
Set maximum moisture % of the rain sensor to prevent flooding by broken pipe.
The LCD will in sequence show "Interval, Duration, Max %(of rain sensor)".
1. Reliable and very easy to use.
2.Solar power supply green power and maintenance free. Battery supplys low cost power.
3.Applies to any soil type, accurately keeps soil moisture in the set range, optimizes irrigation and save water.
4.Using outdoor material, ASA plastic, protected from moisture and ultraviolet rays.
5.This system is good for your backyard organic vegetables, fruit trees, green lawn and vertical landscape.
6. Valve Flow specification: 0.02Mpa≥2.0L/Min, 0.2Mpa≥9.5L/Min 0.5Mpa≥23L/Min, Max pressure: 1.0Mpa.
Optimize irrigation, save water, maintenance free and protect the environment!