Frequency: | 433MHz | Power Output: | 1W |
---|---|---|---|
Input: | Analog 4-20mA | Distance: | 2km |
Protocol: | RS485 Modbus RTU | Program: | Needed |
High Light: | 2km Wireless Control Module,433MHz Wireless Control Module,1W Remote Control Module |
Analog Wireless RTU 4-20mA Signal Wireless Transmitter 2km Wireless Control
Frequency | 433MHz or 450MHz or 470MHz | |
Power output | 100mW(600m),1000mW(3000m) | |
Products | 2AI,4AI,2AO,4AO | |
Input type | 4-20mA or 0-5V or 0-10V | |
Output type | 4-20mA or 0-5V or 0-10V | |
Resolution ratio | 24 bit | |
Accuracy | ±0.02% | |
Power supply | 9-36V DC usually use 24V DC | |
Interface | RS-485 | |
Channel No. | 16ch default, can program via DIP switch | |
Antenna | Sucker antenna with 1.5m cable | |
Working temperature | -35℃~+75℃ industrial | |
Working humidity | 10%~90% relative humidity, no condensation | |
Dimension | 2AI,4AI | 115×90×40(mm) |
2AO,4AO | ||
Fix way | Standard 3.5 inch industrial DIN guild rail |
Parameter | |
Power output: | 1W (or 100mW version) |
Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
Control distance: | 3km (or 1km version) |
Baud rate: | 1200bps |
Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
Networking | |
Networking: | Point to point and point to multipoint |
Protocol: | Modbus RTU protocol |
Port Description | |
Input: | 2 active inputs (passive customize), isolated |
Output: |
2 passive relay outputs, isolated contact max load AC250V/5A,DC30V/5A (active outputs 0-5V customize) |
Communication port | RS485 (wireless RS485 customize) |
Current | |
Transmit current: | <600mA (or 100mA version) |
Receiving current: | <50mA (or 20mA version) |
General | |
Frequency: | 433MHz, 400, 450, 470 or other band |
Channel No: | 16 channels, can change via DIP switch |
Physical Properties | |
Dimension: | 115×90×40(mm) |
Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
Temperature: | -35℃~+75℃( industrial) |
Mounting method: | Standard 3.5 inch industrial guild rail |