Input
Input signal: 4-20mA; 0-20mA
Distribution voltage: 24V, (maximum drive current 30mA)
Input impedance: ≤50Ω
Output
Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V
Output load resistance: RL ≤ 500Ω (when the output is a current signal); RL ≥ 10KΩ (when the output is a voltage signal)
Basic parameters
Power supply: DC24V, ±10%
Current consumption: ≤50mA (one input and one output, 24V power supply, power distribution input, 20mA output); ≤70mA (one input and two output, 24V power supply, power distribution input, 20mA output); ≤100mA (two in two out , 24V power supply, power distribution input, 20mA output)
Basic accuracy: 0.1% F.S.
Temperature drift: 0.005% F.S. / degree (-20 degrees ~ +55 degrees)
Response time: ≤10mS (0-90%) (TYP)
Insulation strength: 1500V AC / 1min (between input, output, and power)
Insulation resistance: ≥100MΩ (between input, output, and power)
Operating temperature range: -20~+55 degrees
Electromagnetic compatibility: in accordance with GB/T 18268 (IEC61326-1)
Applicable field devices: two-wire system, three-wire transmitter; current source.
| Parameter |
| THG-IP |
X |
X |
X |
marks |
| Configuration |
1 |
|
|
1 input 1 output |
| 2 |
|
|
1 inputs 2 outputs |
| |
5 |
|
|
2 inputs 2 outputs |
| Input signal |
1 |
|
4-20mA |
| 2 |
|
0-20mA |
| Output signal |
1 |
4-20mA |
| 2 |
0-20mA |
| 4 |
0-5V |
| 6 |
0-10V |
| Please indicate your required input type and output type when place order |
Your message must be between 20-3,000 characters!
