Home ProductsWireless Radio Modem

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU

I am pleased with them. It was a good choice for our small application. It is a robust device even it has a cheap price. I will use them in our further applications when we should use remote control. Thank you for your support.

—— Codreanu from Romania

Great news! We successfully performed the installation of the two units and transmitted our 4-20mA signal with both antennae. Even the smaller antenna suffices to transmit the signal without any losses whatsoever. So you can understand that we are very happy :) .

—— Kekarios from Greek

I believe you and your products. Sunny is very responsible. The RF modules are really strong and stable. Engineer's suggestions are useful to me. The most important is module's program can updrade on-line by myself. For some special projects, they can customize according my requirements. Thank you for your support all the time.

—— Singh from India

First of all I'd like to thank you for you're prompt service. The system now works perfectly. I left a positive response on your web site. I hope it attracts more customers for you.

—— Peter from Australia

I'm Online Chat Now

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU
5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU

Large Image :  5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU

Product Details:
Place of Origin: China
Brand Name: Lensen
Model Number: LS-R524
Payment & Shipping Terms:
Minimum Order Quantity: 2pcs
Price: Negotiation
Packaging Details: standard carton
Delivery Time: 2-6 days
Payment Terms: T/T, Western Union
Supply Ability: 6000pcs/month
Detailed Product Description
Power Output: 5W Distance: 10km LOS
Interface: RS232, RS485, USB Protocol: Modbus RTU
High Light:

wireless radio module

,

data radio modem

5W PLC Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement For Modbus RTU
 
 
1. General Introduction
LS-R524 wireless DTU whose transmission distance reaches 10km LOS, supports wireless communication between Siemens S7-200, S7-300 series PLC, Schneider PLC, Mitsubishi PLC, ABB PLC etc. LS-R524 supports Modbus protocol, including Modbus ASCII and Modbus RTU protocol, PPI protocol.
 
LS-R524 DTU can also connect with transducer, HMI and sensors for wireless communication. It supports point to point, point to multi-points wireless data transmission. Wireless solution has the advantage of keep users from wiring cables in dangerous field, easy to set up, no need program knowledge. It is a reliable and competitive solution.
 
2. Application Field
* Pressure, flow rate, temperature etc data collections, wireless transmission and control in water/waste water treatment field
* Wind speed, rainfall, humidity etc data collection, wireless transmission and control at whether monitoring station
* Temperature, humidity, concentrations of CO2 etc data collection, wireless transmission and control in agriculture greenhouse

* AGV wireless monitoring and control
* Other kinds of OEM equipment wireless data collection and transmission
* Wireless communication between PLC and sensors on Chemical machinery and equipment, oil field.

 
3. Technical specification

Frequency433MHz or 450MHz, 470MHz
Power Output5W
Protocol supportStandard Modbus RTU or PPI
Power supply9-36V DC usually use 24V DC or 12V DC
InterfaceRS-485(default)or RS232 or USB
Channel No.15 channel, use DIP to change
Antenna Free sucker antenna with 1.5m cable(buy 5.5dBi sucker antenna)
Temperature -35℃~+75℃ (industrial)
Dimension175×115×32(mm) exclude antenna
Fix methodScrew

4. LS-R524 Application examples:
4.1
5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 0
 
4.2
5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 1
 
4.3
5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 2
 
5. LS-R524 DTU networking
LS-R524 DTU adopts half-duplex communication mode. It suits point to multipoints communication. In this way, we should set 1 module as master and others as slaves. Each slave has its own unique ID. Master uses data frame with ID to transmit data or command. All slaves will receive data and compare the received ID with its own ID. If ID is the same, receive it and give corresponding response according the command . If ID is different, just ignore it, give no response. All these should finish by upper protocol. It can promise there is only one radio is in transmitting mode in any time to avoid interference.
 
LS-R524 RTU can also use for point to point communication. This is more easier. When you program serial port, please note it is half-duplex and there is wireless transmission delay.
 
6. LS-R524 DTU DIP switch setting
5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 3
Note: about channel setting

Channel No.DIP SettingChannel No.DIP Setting Channel No.DIP settingChannel No.DIP setting
1

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 4
1234

2

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 5
1234

3

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 6
1234

4

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 7
1234

5

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 8
1234

6

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 9
1234

7

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 10
1234

8

5W Wireless Radio Modem RS232 RS485 USB Interface Cable Replacement wireless DTU 11
1234

DIP1 ON means 1
DIP2 ON means 2
DIP3 ON means 4
DIP4 ON means 8
For example, channel 15, you need to set DIP 1, 2, 3 and 4 all ON
 
About the LED indicator
a. When module is power on, POWER LED is always ON (red).
b. When module enter to set mode (DIP 8 ON), SET LED is always ON (red).
c. When module is transmitting,
if you use RS232 port, RS232 LED blinks (green) regularly.
if you use RS485 port, RS485 LED blinks (green) regularly.
if you use USB port, USB LED blinks (green) regularly.
d. When module is receiving, RF LED blinks (blue) regularly.
 
 
8. LS-R524 DTU Notice in real application
8.1 LS-R524 DTU wireless delay time.
Due to LS-R524 adopts FEC (Forward Error Correction) etc technology to process your data before transmitting, there is a delay time between RxD of a LS-R524 transceiver ‘A’ receives your data, transmits it and the other transceiver ‘B’ receive and transmit by its TxD. Different RF baud rate causes different delay time. Please see the specific delay time below:
 

RF Date Rate
(bps)

Delay
Ts(mS)

RF Date Rate
(bps)

Delay
Ts(mS)

120090960012
240048192006
480024  

 
8.2 LS-R524 DTU error correction method
To promise your system to be more stable and reliable, we suggest you add check or CRC to re-transmit data if there is error.
 
8.3 LS-R524 DTUs transmission method for big data package
In theory, LS-R524 can transmit not limit data package, but we don’t suggest you to transmit too big data package. We suggest each package less than 120B, better 60-100B. Also we suggest your program use ARQ to resend the package with error.
For example, we suppose the real communication BER is 10-4, and user needs to send a 1KB file(10000bit), if you transmit via 1 package, in theory, there will be 1bit error in every receiving time, So this 1KB file can not transmit correctly all the time.
If you can divide the 1KB files into 10 package, each package transmit 100B, in theory, there might be error after you send 10 packages. Module will re-send that package via ARQ. Though, we send 1 more package and the whole efficiency reduce, but this can promise all data can be received correctly.
 
 

Contact Details
Shenzhen Qianhai Lensen Technology Co., Ltd

Contact Person: Sunny

Send your inquiry directly to us (0 / 3000)