868MHz Wireless Analog I O Module 1W Modbus RTU 2 Channels 4-20mA / 2 Channels 0-5V Sensor

868MHz Wireless Analog I O Module 1W Modbus RTU 2 Channels 4-20mA / 2 Channels 0-5V Sensor
 
 
Introduction
Lensen wireless analog module is used to help you build wireless connection between your sensors on site and PLC/PC in control room. They collect analog signal 0-5V or 4-20mA. With high accuracy, they are widely used in industry automation area for sensor wireless monitoring
LS-RAI02 Modbus RTU 

 
 
LS-RAO02 wireless analog output module

 
 
LS-RAI04 wireless analog acquisition module

 
 
LS-RAO04 wireless analog output module

 
Application area:
Problem Notification
Save time in large facilities by activating an overhead notification light when a problem occurs, letting the supervisor know exactly where to go.
Dust Suppression
Use wireless I/O module to operate your dust
Data Logging
Wirelessly acquire and log various data from a remote location using our analog I/O module
Stacker Control
Start and stop your stacker/reclaimir. Connect PLC in control center with stacker and reclaimer.
Proximity Detection
Mount a transmitter with adjustable range on heavy equipment, mount a receiver in a “blind spot,” and then set up the receiver to sound an alarm or turn on a light whenever the equipment is operating in the area.
Chemical Level Monitoring
Monitor water chlorination or other chemicals remotely.
Traffic Signals
Avoid having to lay new wire by using wireless transmitters and receivers to control traffic signs such as “Railroad Crossing Ahead” when a train is present.
Grain Elevators
Our wireless transmitters and receivers can be used to monitor grain elevator conditions or control different functions. To collect RS485 data. To monitor temperature and humidity in Grain.
Freight Loading
Digital I/O module for crane control and analog I/O module to send the load information wirelessly to another location.