Frequency: | 433/470 | Power Output: | 1W |
---|---|---|---|
Distance: | 2-3km | Input: | 5 Slaves I/O |
Output: | 16DI16DO | Protocol: | Modbus RTU |
Application: | PLC Wireless Control | Communication: | I/O Mirroring |
High Light: | I O Mirroring Modbus RTU module,2km Modbus RTU module,Modbus RTU remote on off control |
Lora Wireless RTU Remote I/O Mirroring Control 2km Wireless ON-OFF Control
Master side 16DI16DO to connect with the PLC.
Slave side there are 5 points, some places has 2DI2DO, some places has 4DI4DO.
Our solution is using two groups of wireless RTU control system
One group master side uses LS-RDIO0808, 3 slaves use LS-RDIO0202.
The other group master uses LS-RDIO0808, 2 slaves, each one use LS-RDIO0202.
LS-RDIO0808 parameter
Parameter | |
Power output: | 1W or 100mW version |
Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
Control distance: | 3km or (1km version) |
Baud rate: | 1200bps |
Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
Networking | |
Networking: | Point to point and point to multipoint |
Port Description | |
Input: | 8 active DI (passive customized) |
Output: |
8 relay passive outputs, contact max load AC250V/5A,DC30V/5A (Active output 0-5V customized) |
Communication port | RS485 (wireless RS485 customize) |
Current | |
Transmit current: | <600mA (or 100mA version) |
Receiving current: | <50mA (or 20mA version) |
General | |
Frequency: | 433MHz, 400, 450, 470 or other band |
Channel No: | 16 channels,can change via DIP switch |
Physical Properties | |
Dimension: | 145×90×40(mm) |
Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
Temperature: | -35℃~+75℃( industrial) |
Mounting method: | Standard 3.5 inch industrial guild rail |
LS-RDIO0404 parameter
Parameter | |
Power output: | 1W or 100mW version |
Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
Control distance: | 2-3km LOS or (<1km version) |
Baud rate: | 2400bps default |
Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
Networking | |
Networking: | Point to point and point to multipoints |
Port Description | |
Input: | 4 digital active inputs(passive customize) |
Output: |
4 relay outputs, contact max load AC250V/5A,DC30V/5A (active outputs 0-5V customize) |
Communication port | RS485 (wireless RS485 customize) |
Current | |
Transmit current: | <600mA (or 100mA version) |
Receiving current: | <50mA (or 20mA version) |
General | |
Frequency: | 433MHz, 450, 470 or other band |
Channel No: | 16 channels, can change via DIP switch |
Physical Properties | |
Dimension: | 115×90×40(mm) |
Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
Temperature: | 35℃~+75℃( industrial) |
Mounting method: | Standard 3.5 inch industrial guild rail |
LS-RDIO0202 Parameter
Parameter | |
Power output: | 1W (or 100mW version) |
Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
Control distance: | 3km (or 1km version) |
Baud rate: | 1200bps |
Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
Networking | |
Networking: | Point to point and point to multipoint |
Protocol: | Modbus RTU protocol |
Port Description | |
Input: | 2 active inputs (passive customize), isolated |
Output: |
2 passive relay outputs, isolated contact max loadAC250V/5A,DC30V/5A (active outputs 0-5V customize) |
Communication port | RS485 (wireless RS485 customize) |
Current | |
Transmit current: | <600mA (or 100mA version) |
Receiving current: | <50mA (or 20mA version) |
General | |
Frequency: | 433MHz, 400, 450, 470 or other band |
Channel No: | 16 channels, can change via DIP switch |
Physical Properties | |
Dimension: | 115×90×40(mm) |
Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
Temperature: | -35℃~+75℃( industrial) |
Mounting method: | Standard 3.5 inch industrial guild rail |