|
Product Details:
Payment & Shipping Terms:
|
| Input: | 2AI+2DI2DO | Output: | 2AO+2DI2DO |
|---|---|---|---|
| Frequency: | 433MHz/868MHz/915MHz | Distance: | 2km LOS |
| Application: | PLC Wireless Control | Control: | I/O Mirroring |
| High Light: | RS485 Wireless Modbus RTU,Reclaimer Wireless Modbus RTU,PLC Control modbus rtu module |
||
Wireless Modbus RTU for Stacker/Reclaimer Remote Control
This application is widely used for PLC wireless collect 4-20mA signal and PLC remote control stacker and reclaimer.
Introduction
You could refer the diagram, our wireless RTUs are used to help build wireless communication between stacker and reclaimer machine with its control room. This will reduce much cost and minitor, maintain time.
Here we use LS-RDIO0202+LS-RAI/O expanders, users can get the 4-20mA analog signal and ON-OFF condition of machine in time.
Data sheet of LS-RAI/O02
|
Frequency |
433MHz or 450MHz or 470MHz |
|
Power output |
1W |
|
Products |
2AI |
|
Input type |
4-20mA or 0-5V or 0-10V |
|
Output type |
4-20mA or 0-5V or 0-10V |
|
Resolution ratio |
24 bit |
|
Accuracy |
±0.02% |
|
Power supply |
9-36V DC usually use 24V DC |
|
Interface |
RS-485 |
|
Channel No. |
16ch default, can program via DIP switch |
|
Antenna |
Sucker antenna with 1.5m cable |
|
Working temperature |
-35 °C ~ +75 °C industrial |
|
Working humidity |
10%-90% relative humidity, no condensation |
|
Dimension |
115×90×40(mm) |
|
Fix way |
Standard 3.5 inch industrial DIN guild rail |
Data sheet of LS-RDIO0202
|
Parameter |
|
|
Power output: |
1W (or 100mW version) |
|
Power supply: |
9V-30V (usually choose 24V DC or 12V DC) |
|
Control distance: |
3km (or 1km version) |
|
Baud rate: |
1200bps |
|
Receiving sensibility: |
-123dBm@1200bps, -118dbm(9600bps) |
|
Networking |
|
|
Networking: |
Point to point and point to multipoint |
|
Protocol: |
Modbus RTU protocol |
|
Port Description |
|
|
Input: |
2 active inputs (passive customize), isolated |
|
Output: |
2 passive relay outputs, isolated contact max load AC250V/5A,DC30V/5A (active outputs 0-5V customize) |
|
Communication port |
RS485 (wireless RS485 customize) |
|
Current |
|
|
Transmit current: |
<600mA (or 100mA version) |
|
Receiving current: |
<50mA (or 20mA version) |
|
General |
|
|
Frequency: |
433MHz, 400, 450, 470 or other band |
|
Channel No: |
16 channels, can change via DIP switch |
|
Physical Properties |
|
|
Dimension: |
115×90×40(mm) |
|
Antenna Connector: |
SMA,vehicle antenna with 1.5m cable |
|
Temperature: |
-35℃~+75℃( industrial) |
|
Mounting method: |
Standard 3.5 inch industrial guild rail |
In control room, the PLC can get reclairmer's analog signal by wireless and control the ON-OFF condition. It's easy to operate.
OK, welcome to try our goods!
Contact Person: Sunny
Tel: +8613826574847
433MHz RF Data Module 100mW Wireless Data Transfer 1km RS232 RS485 TTL
433MHz RF Data Module , Wireless Rf Transmitter 2KM Wireless Transceiver Module For AMR
100mW Wireless Data Module 433MHz Wireless Data Transfer For 500m Serial Data
100mW Wireless Data Module RS232 Interface 500m Wireless Data Transmission 433MHz
Intelligent Wireless Irrigation Controller , Irrigation Program Wireless Sprinkler Controller
9-12V Wireless Irrigation Controller Wire Solution Sub Decode Board 128 Station Decode Board
Underground Internet Controlled Sprinkler System Intelligent For Pulse Drive Solenoid
433MHz Wireless irrigation System Solenoid Valve On-Off Control
433MHz Wireless Tank Level Monitoring System HMI wireless control pump ON OFF 2km
2DI2DO PLC Wireless Pump Control / Relay / Valve 433MHz Wireless ON OFF Control
Pump ON-OFF Control System According the Float Switch High Or Low Level
10DI 10DO Wireless Modbus RTU 10 Digital Inputs 10 Relay Outputs 2km Wireless ON OFF Control
