| Place of Origin: | China |
|---|---|
| Brand Name: | Unimat |
| Certification: | CE |
| Model Number: | X1-60TD |
| Minimum Order Quantity: | 2pcs |
| Price: | Negotiation |
| Packaging Details: | standard carton |
| Delivery Time: | 2-8 days |
| Payment Terms: | T/T |
| Supply Ability: | 6000pcs/month |
| Color: | White | Fuse: | 60V 2A |
|---|---|---|---|
| Input: | NPN/PNP | Output: | 16 |
| High Light: | DC24V PLC Programmable Logic Controller,5ms PLC Programmable Logic Controller,DC24V Industrial Automation Using PLC |
||
DC24V PLC Programmable Logic Controller Industrial Automation Using
X1-60TD PLC for Industry Automation Low Cost PLC
Parameters
| Item No. | Specifictions | |||
| Part No. | X1-60TD-E0 | |||
| Voltage | DC24V | |||
| Voltage range | DC 20.4～28.8V | |||
| Allowed voltage | continue to operate for the instantaneous power failure less than 5ms | |||
| Fuse | 60V 2A | |||
| Surge Current | 12A,0.5ms below/28.8V DC | |||
| Power consumption | 8W | |||
| DC24V power supply | 600mA below | |||
| Input specifications | ||||
| Input | 36 | |||
| Connection method | Detachable terminal block (M3 screw) | |||
| Input method | NPN/PNP | |||
| Input signal voltage | DC power supply type: dc20.4v ～ 28.8v | |||
| Input impedance | X0-X2 | 2.4K | ||
| X3 above | 5.6K | |||
| ON Input induced current | X0-X2 | More than 5mA | ||
| X3 above | More than 2.4mA | |||
| OFF Input induced current | 1mA below | |||
| Input response time | No more than 4.5ms | |||
| Input signal form | Voltage free contact input | |||
| Drain input: NPN open collector transistor | ||||
| Source type input:PNPOpen collector transistor | ||||
| Input circuit isolation | Optocoupler isolation | |||
| Display of input | When the optocoupler is driven, the LED light on the panel is on | |||
| Output specifications | ||||
| Output | 16 | |||
| Connection method | Detachable terminal block (M3 screw) | |||
| Output method | NPN/PNP | |||
| External Power supply | DC5～30V | |||
| Max load | Resistive load | 0.5A/single point；0.8A/4 points | ||
| inductive load | 12W/DC24V | |||
| Light load | High speed:2W/DC24V,common:5W/DC24V | |||
| Min Load | 5mA(DC5～24V) | |||
| Open circuit leakage current | 0.1mA以下/DC30V | |||
| Turn on resistance | High speed point 0.3Ω typical(Max0.6Ω) | |||
| response time | OFF→ON | High spend:10μs below/10mA above(DC5～24V) | ||
| Ordinary :0.2ms below/200mA above (DC24V) | ||||
| ON→OFF | High spend:10μs below/10mA above(DC5～24V) | |||
| Ordinary:0.2ms以下/200mA above(DC24V) | ||||
| Loop isolation | Optocoupler isolation | |||
| Display of output action | When the optocoupler is driven, the LED light on the panel is on | |||
| Shield transmission distance | 500M(ordinary output) | |||
| Unshielded transmission distance |
150M(ordinary output) |
|||
Wiring Diagram
